我們是英國UKCA合格評定授權機構，已經獲得相關授權（授權編號：1674），我們將在第一時間為中國的產品進入英國市場提供認證檢測等服務。


UKCA（英國合格評定）標志是一個新的英國產品認證標志，適用于在英國（英格蘭，威爾士和蘇格蘭）投放市場的商品。它涵蓋了大多數以前需要CE標記的商品。僅UKCA標志不適用用于在北愛爾蘭市場上投放的商品，北愛爾蘭需要CE標志或UK（NI）標志。2021年1月1日起，將開始實施UKCA標志。
 
The UKCA (UK Conformity Assessed) marking is a new UK product marking that will be used for goods being placed on the market in Great Britain (England, Wales and Scotland). It covers most goods which previously required the CE marking.The UKCA marking alone cannot be used for goods placed on the Northern Ireland market, which require the CE marking or UK(NI) marking.Using the UKCA mark from 1 January 2021.
 
 
Find out if you will need to use the new UKCA marking and how to use it.
以下您可以了解您是否需要使用UKCA標志以及如何使用它。
 
1.Check whether you will need to use the new UKCA marking
   您的產品是否需要UKCA標志？
 
Selling goods in Great Britain. The UKCA marking will apply to most goods currently subject to the CE marking. It will also apply to aerosol products. From 1 January 2021 the technical requirements (‘essential requirements’) you must meet – and the conformity assessment processes and standards that can be used to demonstrate conformity – will be largely the same as they are now.
在英國銷售商品，UKCA標志將適用于當前受CE標志限制的大多數商品。 它還將適用于氣霧劑產品。2021年1月1日起，必須滿足的技術要求（“基本要求”）以及可用于證明合格性的合格評定過程和標準將與現在基本相同。
 
The UKCA marking can be used from 1 January 2021. However, to allow businesses time to adjust to the new requirements, you will still be able to use the CE marking until 1 January 2022 in most cases.
UKCA標志可從2021年1月1日開始使用。但是，為了讓企業有時間適應新要求，在大多數情況下，仍然可以在2022年1月1日之前使用CE標志。
 
 
2.When to use the UKCA marking
   何時實施UKCA標志？
 
You will need to use the new UKCA marking immediately after 1 January 2021 if all of the following apply. Your product:
•is for the market in Great Britain
•is covered by legislation which requires the UKCA marking
•requires mandatory third-party conformity assessment
•conformity assessment has been carried out by a UK conformity assessment body and you haven’t transferred your conformity assessment files from your UK body to an EU recognised body before 1 January 2021
如果符合以下所有條件，則需要在2021年1月1日之后立即使用新的UKCA標志。 您的產品：
•用于英國市場
•涵蓋在UKCA標志要求的范圍內
•需要強制性第三方合格評定
•合格性評估由英國合格性評估機構完成，但尚未在2021年1月1日之前將合格性評估文件從英國機構轉移到歐盟認可的機構
 
 
3.Placing the UKCA marking
   如何加貼UKCA標志？
 
In most cases, you must apply the UKCA marking to the product itself or to the packaging. In some cases, it may be placed on the manuals or on other supporting literature. This will vary depending on the specific regulations that apply to the product.
在大多數情況下，您必須在產品本身或包裝上加貼UKCA標志。在某些情況下，它可能放在手冊或其他配套文獻上。這將根據適用于該產品的特定法規而有所不同。
 
The following general rules apply:
•UKCA markings must only be placed on a product by you as the manufacturer or your authorised representative (where allowed for in the relevant legislation)
•when attaching the UKCA marking, you take full responsibility for your product’s conformity with the requirements of the relevant legislation
•you must only use the UKCA marking to show product conformity with the relevant UK legislation
•you must not place any marking or sign that may misconstrue the meaning or form of the UKCA marking to third parties
•you must not attach other markings on the product which affect the visibility, legibility or meaning of the UKCA marking
•the UKCA marking cannot be placed on products unless there is a specific requirement to do so in the legislation
以下基本規則適用：
•UKCA標志只能由制造商或您的授權代表在產品上加貼（在相關法律允許的范圍內）；
•加貼UKCA標志時，您應對產品符合相關法規的要求承擔全部責任；
• UKCA標志只表明產品符合英國相關法規；
• 不得加貼任何可能誤解UKCA標記的含義或形式的標記或標志提供給第三方
• 不得在產品上附加影響 UKCA標記的可見性，易讀性或含義的其他標記
• 除非法律有特殊要求，否則不得在產品上放置UKCA標志
 
4.Rules for using the UKCA image
   UKCA圖標使用要求
 
You must make sure that:
•if you reduce or enlarge the size of your marking, the letters forming the UKCA marking must be in proportion to the version set out below
•the UKCA marking is at least 5mm in height – unless a different minimum dimension is specified in the relevant legislation
•the UKCA marking is easily visible, legible (from 1 January 2023 it must be permanently attached)
必須確保如下：
•如果減小或擴大標志的大小，必須等比例進行；
•UKCA標志的高度至少為5mm-除非相關法柜規定了不同的最小尺寸
•UKCA標志明顯可見，清晰易讀（自2023年1月1日起，必須永久粘貼）
 

 
 
5.Technical documentation
   技術文檔
 
You, or your authorised representative (where allowed for in the relevant legislation), must keep documentation to demonstrate that your product conforms with the regulatory requirements. This must be kept for up to 10 years after the product is placed on the market. This information can be requested at any time by market surveillance or enforcement authorities to check that your product conforms with the statutory requirements.
您或您的授權代表（在相關法規允許的范圍內）必須保留文件以證明您的產品符合法規要求。 產品投放市場后，技術文檔必須保存長達10年。市場監督或執法機構可隨時要求提供此信息，以檢查您的產品是否符合法定要求。
 
The information you must keep will vary depending on the specific legislation relevant to your product. You must keep general records of:
•how the product is designed and manufactured
•how the product has been shown to conform to the relevant requirements
•the addresses of the manufacturer and any storage facilities
 
您必須保留的信息將根據與產品相關的特定法規而有所不同。 您必須保留以下方面的基本記錄：
•產品的設計和制造方式
•如何證明產品符合相關要求
•制造商和任何存儲設施的地址
 
You should keep the information in the form of a technical file which can be supplied if requested by a market surveillance authority.
您應以技術文件的形式保存信息，如果市場監督機構要求，可以提供該文件。
 
 
6.UK Declaration of Conformity
   符合性聲明
 
The UK Declaration of Conformity is a document which must be drawn up for most products lawfully bearing a UKCA marking.
根據法規要求，合法帶有UKCA標志的產品必須起草一份符合性聲明。
 
In the document you as the manufacturer, or your authorised representative (where allowed for in the relevant legislation), should:declare that the product is in conformity with the relevant statutory requirements applicable to the specific product；make sure the document has the name and address of the manufacturer (or your authorised representative) together with information about the product and the conformity assessment body (where relevant).
文件中您作為制造商或您的授權代表（在相關法律允許的范圍內）應：聲明該產品符合適用于特定產品的相關法定要求；確保文件上有制造商（或您的授權代表）的名稱和地址，以及有關產品和合格評定機構的信息（如果有）。
 
The UK Declaration of Conformity should be available to market surveillance authorities on request.
市場監督機構可要求獲得《英國符合性聲明》。
 
The information required on the Declaration of Conformity will be largely the same as what is currently required on an EU Declaration of Conformity. This can vary depending on the application legislation but generally should include:
•your name and full business address or that of your authorised representative
•the product’s serial number, model or type identification
•a statement, stating you take full responsibility for the product’s compliance
•the details of the approved body which carried out the conformity assessment procedure (if applicable)
•the relevant legislation with which the product complies
•your name and signature
•the date the declaration was issued
•supplementary information (if applicable)
符合性聲明中所需的信息與歐盟符合性聲明中當前所需的信息基本相同。
可能會根據應用法規而有所不同，但通常應包括：
•您的名稱和完整的公司地址或授權代表的名稱和完整的公司地址
•產品的序列號，型號或類型識別
•聲明，說明您對產品的合規性負全部責任
•進行合格評定程序的認可機構的詳細信息（如果適用）
•產品符合的相關法規
•您的姓名和簽名
•聲明簽發日期
•補充信息（如果適用）
 
You will need to list:relevant UK rather than EU legislation;UK designated standards rather than standards cited in the Official Journal of the European Union.
您將需要列出：英國相關法規，而非歐盟法規；英國指定的標準，而不是《歐盟官方期刊》中引用的標準。
 
On 1 January 2021 the UK standards will be the same in substance and with the same reference as the standards used in the EU. However, they will use the prefix ‘BS’ to indicate that they are standards adopted by the British Standards Institution as the UK’s national standards body.
從2021年1月1日起，英國標準的實質和參考標準將與歐盟使用的標準相同。 但是，它們將使用前綴“ BS”來表示它們是作為英國國家標準機構的英國標準協會采用的標準。
 
 
7.Product areas covered by the UKCA marking
   UKCA標志涵蓋的產品區域
 
•Toy safety/玩具安全
•Recreational craft and personal watercraft/娛樂船和私人船只
•Simple pressure vessels/簡單壓力容器
•Electromagnetic compatibility/電磁兼容
•Non-automatic weighing instruments/非自動稱量儀器
•Measuring instruments/測量儀器
•Lifts/升降機
•ATEX/防爆設備
•Radio equipment/無線電設備
•Pressure equipment/壓力設備
•Personal protective equipment/個人保護設備
•Gas appliances/燃氣用具
•Machinery/機械
•Outdoor noise/室外噪音
•Ecodesign/生態設計
•Aerosols/氣溶膠
•Low voltage electrical equipment/低壓電器設備
•Restriction of hazardous substances/有害物質限制
 
Products covered by the UKCA marking but have some special rules/UKCA標志涵蓋的產品，但有一些特殊規則:
•medical devices/醫療設備
•rail interoperability/鐵路互通性
•construction products/建筑產品
•civil explosives/民用炸藥
 
 
8.Transitional measures relating to the UKCA marking
    與UKCA標志有關的過渡措施
 
For many product types (listed above), the following transitional measures apply.
對于許多產品類型（上面列出的），適用以下過渡措施。
 
Until 1 January 2023, for most goods (other than those subject to special rules) you have the option to affix the UKCA marking on a label affixed to the product or on an accompanying document. The economic operators (whether manufacturer, importer or distributor) should take reasonable steps to ensure the UKCA marking remains in place. Products that require the UKCA marking cannot be made available without it (other than where the CE marking is being used before 1 January 2022).
在2023年1月1日之前，對于大多數商品（受特殊規則約束的商品除外），您可以選擇在產品的標簽或隨附文件上粘貼UKCA標志。 經濟經營者（無論是制造商，進口商還是分銷商）應采取合理步驟，以確保UKCA標志保持不變。 要求UKCA標志的產品必須有UKCA標志才能生產（除非在2022年1月1日之前使用CE標志）。
 
From 1 January 2023, the UKCA marking must, in most cases, be affixed directly to the product. You should start building this into your design process ready for this date.
從2023年1月1日開始，在大多數情況下，必須將UKCA標志直接加貼在產品上。 您應該為此準備好開始將其構建到設計過程中。
 
Construction products, medical devices, interoperability of the rail system and transportable pressure equipment are covered by the UKCA marking, however the above transitional measures are not applicable.
UKCA標志涵蓋了建筑產品，醫療設備，導軌系統互通性和可移動壓力設備，但是上述過渡性措施不適用。